User's Guide

17
5.
Press the Inputs button to go to the Input Signal
Sensing screen, OR press the Exit button to return to
the Output to Input screen.
Check Signal Status
1. From the Output to Input screen, press the Out/In
button, then press the Inputs button to access the
Input Signal Sensing screen.
2. On the Input Signal Sensing screen, view a shaded
circle by the device connection number of any input
device with a signal present.
View Network Settings
To view network settings, access the Network settings
screen. These are view-only fields: MAC Address, DHCP,
IP Address, Subnet Mask, and Default Gateway
Configuration. By default, the system uses DHCP.
Input Signal Sensing
1 5 o _9 o 13 o
2 o 6 o 10 o 14 o
3 o 7 o 11 o 15 o
4 o 8 o 12 o 16 o
OUTPUTS EXIT
Network - Ethernet
MAC 00:00:00:00:00:00