User guide

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization NV Media Card
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
20 Unidrive M100 User Guide
Issue Number: 1
Figure 3-6 Removal of the AI-Backup Adaptor
• To remove the AI-Backup adaptor, pull it up away from the drive in the direction shown (1)
3.4 Dimensions and mounting methods
The drive is surface mounted. The following drawings show the dimensions of the drive and mounting holes to allow a back plate to be prepared.
3.4.1 Surface mounting
Figure 3-7 Surface mounting the size 1 drive
1
160 mm (6.3 in)
137 mm (5.4 in)
130 mm (5.12 in)
75 mm (3.0 in)
9.0 mm
(0.35 in)
8.0 mm
(0.31 in)
143 mm
(5.63 in)
53 mm (2.1 in)
11 mm
(0.43 in)
Æ5.0 mm
(0.2 in) x 4 holes