User guide

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media
Card
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
14 Unidrive M100 User Guide
Issue Number: 1
2.5 Keypad and display
The keypad and display provide information to the user regarding the operating status of the drive and trip codes, and provide the means for changing
parameters, stopping and starting the drive, and the ability to perform a drive reset.
(1) The Enter button is used to enter parameter view or edit mode, or to accept a parameter edit.
(2 / 5) The Navigation keys can be used to select individual parameters or to edit parameter values.
(3) The Stop / Reset key is used to stop and reset the drive in keypad mode. It can also be used to reset the drive in terminal mode.
(4) The Start key is used to start the drive in keypad mode.
(6) The Escape key is used to exit from the parameter edit / view mode.
(7) The Speed Reference Potentiometer is used to control the speed reference in keypad mode (only on Unidrive M101).
2.6 Nameplate description
See Figure 2-2 for location of rating labels.
Figure 2-5 Typical drive rating labels for size 2
Refer to Figure 2-1 Model number on page 9 for further information relating to the labels.
Figure 2-3 Unidrive M100 keypad detail Figure 2-4 Unidrive M101 keypad detail
1
2
3
4
5
6
V A Hz rpm %
1
7
6
V A Hz rpm %
Model number
Refer to
User Guide
Date code
Input
voltage
Power rating
M100-022 00042 A
Model
number
Input voltage
Output
voltage
Serial
number
Input
frequency
Power
rating
Date code
No. of phases &
Max input current
Heavy duty
output current
Approvals
M100-022 0042 A
CE approval Europe
C Tick approval Australia
UL / cUL approval
USA &
Canada
RoHS compliant Europe
R
Key to approvals