User guide

54 Unidrive M700 Getting Started Guide
Issue Number: 5
8 NV Media Card Operation
8.1 Introduction
The Non-Volatile Media Card feature enables simple configuration of parameters, parameter back-up
and drive cloning using a SMARTCARD or SD card in the future. The drive offers backward
compatibility for a Unidrive SP SMARTCARD.
The SMARTCARD can be used for:
• Parameter copying between drives
• Saving drive parameter sets
The NV Media Card (SMARTCARD) is located at the top of the module under the drive display (if
installed) on the left-hand side.
Ensure the SMARTCARD is inserted with the contacts facing the right-hand side of the drive.
The drive only communicates with the NV Media Card when commanded to read or write, meaning
the card may be "hot swapped".
Figure 8-1 Installation of the SMARTCARD
1. Installing the SMARTCARD
2. SMARTCARD installed
Be aware of possible live terminals when inserting or removing the SMARTCARD
WARNING