User guide

40 Unidrive M700 Getting Started Guide
Issue Number: 5
* See section 8 NV Media Card Operation on page 54 for more information on these functions.
** These functions do not require a drive reset to become active. All other functions require a drive
reset to initiate the function.
8yyy* NV Media card: Compare the data in the drive with file xxx
9555* NV media card: Clear the warning suppression flag
9666* NV media card: Clear the warning suppression flag
9777* NV media card: Clear the read-only flag
9888* NV media card: Set the read-only flag
9999* NV media card: Erase and format the NV media card
110S0
Transfer electronic nameplate motor object parameters from the drive to an encoder connected to
the drive or an option module.
110S1
Transfer electronic nameplate motor objects parameters from an encoder connected to the drive or
option module to the drive parameters.
110S2 As 110S0, but for performance object 1
110S3 As 110S1, but for performance object 1
110S4 As 110S0, but for performance object 2
110S5 As 110S1, but for performance object 2
110S6
Transfer electronic nameplate motor object parameters from the drive to an encoder connected to
the drive or an option module in the Unidrive SP format.
12000**
Only display parameters that are different from their default value. This action does not require a
drive reset.
12001**
Only display parameters that are used to set-up destinations (i.e. DE format bit is 1). This action does
not require a drive reset.
15xxx*
Transfer the user program in an option module installed in slot 1 to a non-volatile media card file xxx
16xxx* Transfer the user program in an option module installed in slot 2 to a non-volatile media card file xxx
17xxx* Transfer the user program in an option module installed in slot 3 to a non-volatile media card file xxx
18xxx* Transfer the user program from file xxx in a non-volatile media card to an option module installed in slot 1.
19xxx* Transfer the user program from file xxx in a non-volatile media card to an option module installed in slot 2.
20xxx* Transfer the user program from file xxx in a non-volatile media card to an option module installed in slot 3.
21xxx* Transfer the user program in an option module installed in slot 4 to a non-volatile media card file xxx.
22xxx* Transfer the user program from file xxx in a non-volatile media card to an option module installed in slot 4.
Value Action