User guide

90 Unidrive SP Short Form Guide
www.controltechniques.com Issue Number: 2
9.10 Menu 10: Status and trips
Parameter
10.01 Drive ok
10.02 Drive active
10.03 Zero speed
10.04 Running at or below minimum speed
10.05 Below set speed
10.06 At speed
10.07 Above set speed
10.08 Load reached
10.09 Drive output is at current limit
10.10 Regenerating
10.11 Braking IGBT active
10.12 Braking resistor alarm
10.13 Direction commanded
10.14 Direction running
10.15 Mains loss
10.16 Under voltage active
10.17 Overload alarm
10.18 Drive over temperature alarm
10.19 Drive warning
10.20 Trip 0
10.21 Trip 1
10.22 Trip 2
10.23 Trip 3
10.24 Trip 4
10.25 Trip 5
10.26 Trip 6
10.27 Trip 7
10.28 Trip 8
10.29 Trip 9
10.30 Full power braking time
10.31 Full power braking period
10.32 External trip
10.33 Drive reset
10.34 Number of auto-reset attempts
10.35 Auto-reset delay
10.36 Hold drive ok until last attempt
10.37 Action on trip detection
10.38 User trip
10.39 Braking energy overload accumulator
10.40 Status word
10.41 Trip 0 time: years.days
10.42 Trip 0 time: hours.minutes
10.43 Trip 1 time
10.44 Trip 2 time
10.45 Trip 3 time
10.46 Trip 4 time
10.47 Trip 5 time
10.48 Trip 6 time
10.49 Trip 7 time
10.50 Trip 8 time
10.51 Trip 9 time