User guide

12 Unidrive SP Short Form Guide
www.controltechniques.com Issue Number: 2
Output current
The continuous output current ratings given on the rating label are for maximum 40°C
(104°F), 1000m altitude and 3.0 kHz switching. Derating is required for higher switching
frequencies, ambient temperatures >40°C (104°F) and higher altitude. For derating
information, refer to the Unidrive SP User Guide on the CD supplied with the drive.
Input current
The input current is affected by the supply voltage and impedance. The input current
given on the rating label is the typical input current and is stated for a balanced supply.
2.3 Options / Accessories
Figure 2-3 Drive features and options
* Part supplied with drive.
Keypad
SM-Keypad
SM-Keypad Plus
SM-I/O Plus
SM-I/O Lite
SM-I/O Timer
SM-I/O PELV
SM-I/O 120V
SM-I/O 32
SM-I/O 24V Protected
SM-Applications
SM-Applications Lite
SM-Applications Lite V2
SM-EZMotion
SM-Applications Plus
SM-Register
SM-Safety
Automation
(I/O Expansion)
(Applications)
Feedback
SM-Universal Encoder Plus
SM-Resolver
SM-Encoder Plus
SM-Encoder Output Plus
Fieldbus
SLM
SM-PROFIBUS-DP-V1
SM-DeviceNet
SM-INTERBUS
SM-CAN
SM-CANopen
SM-SERCOS
SM-Ethernet
SM-LON
SM-EtherCAT
SM-SLM
SMARTCARD*
CT Comms
cable
Internal braking
resistor (size 0
to 2 only)
External
footprint /
bookcase
EMC filter
SM slot 1
SM slot 2
SM slot 3
15-way D-type
converter