Technical Specs

CRE Wireless Remote Control Document #: DOC0003761A
Technical Specification Agile File Version: A
______________________________________________________________________________________________
_____________________________________________________________________________________________
Control Solutions, Inc. Uncontrolled When Printed Page 3 of 8
4 System Specification
s
ID
Requirement
Value
Validation Method
R-1
Operating Frequency
2.4 GHz ISM band
Inspection
R-2
Number of channels
Operates on one of 16 available
channels
Inspection
R-3
RF Compliance
FCC, IC, ETSI, C-TICK
Inspection
R-4
Max Chassis (master) stations
1
Inspection
R-5
Max Repeater (coordinator) Units
8
Inspection
R-6
Max Fob (end device) Units
>200
Inspection
R-7
Channel Selection Based on quietest available
channel at time of pairing
Demonstration
The Fob is based on the industrial design CAD
package supplied by Bruno. Each fob may be paired
with one and only one stairlift network (pairing again
removes any old association). Pairing is initiated by
pressing a hidden button (e.g. beneath the battery
cover). When initiated, the remote will search the
available channels for a network that is also in ‘pairing
mode’ and associate itself with that network. During
this process it will also discover available Repeater
Units that will extend the range of the network.
The unit contains two colored LED indicators that
illuminate according to the Bruno LED Operation for
CRE-3100 Project document [1] when the unit is
active. During periods of non-use, the unit shuts off to
conserve power until the user presses one of the control buttons.