Technical Specs

CRE Wireless Remote Control Document #: DOC0003761A
Technical Specification Agile File Version: A
______________________________________________________________________________________________
1 Introduc
tion
The Wireless Control System allows a user to control and receive status indications from a Bruno CRE-3100 stair
lift. The system consists of a ‘chassis’ module, which is installed in the main drive chassis of the lift, one or more
‘fobs’ which are two-button battery-powered remote controls, and one or more optional repeater units (which are
AC powered stations which extend the range of the control network).
This specification describes the operation of the system as well as key specifications for each of the system
elements.
2 Revision History
The revision history and release status of this document is stored electronically in Agile. To locate this history in Agile,
search and open this document and click on the Changes tab.
3 References, Attachments, Definitions, Acronyms and Abbreviations
This section provides a complete list of all documents referenced elsewhere in the document.
3.1 References
[1] Bruno LED Operation for CRE-3100 Project January 28, 2015
[2] DOC0003735A CRE-3100 System Requirements Specification
3.2 Standards
[3] EN 81-40: 2008 Sections 5.5.4.1, 5.5.4.2, 5.5.13.3, and 5.5.14.1
[4] CSA B613-00 Sections 8.1 and 8.2.3
[5] CSA B44.1-14/ASME A17.5-2014 Sections 6.3.1, 6.3.2, 6.3.3, 6.3.4, 6.4.1, 6.5, 19.5.1 and 19.5.2
[6] ASME A18.1-2014 Section 4.10.1
3.3 Attachments
None.
3.4 Acronyms and Abbreviations
For system terminology and associate acronyms, refer to the CRE-3100 System Requirements Specification [2].
EEPROM Electrically Erasable/Programmable Read Only Memory
GPIO General Purpose Input/Output
I/O Input/Output
LED Light Emitting Diode
PCB Printed Circuit Board
RAM Random Access Memory
_____________________________________________________________________________________________
Control Solutions, Inc. Uncontrolled When Printed Page 2 of 8