User manual

IEC61131 User and Reference Manual
April 22, 2008
551
Point Status Tabs
The point status tabs display the state of each point of the selected type in the controller. The
following tabs are displayed.
 Binary In (binary inputs information)
 Binary Out (binary outputs information)
 AIN-16 (16-bit analog inputs information)
 AIN-32 (32-bit analog inputs information)
 AIN-Float (short float analog inputs information)
 AOUT-16 (16-bit analog outputs information)
 AOUT-32 (32-bit analog outputs information)
 AOUT-Float (short float analog outputs information)
 Counter-16 (16-bit counter inputs information)
 Counter-32 (32-bit counter inputs information)
Each of the tabs displays information in the same format. The example below shows the appearance
of the binary input page.
The DNP Address column shows the DNP address of the point.
The Modbus Address column shows the Modbus register address of the point.
The Value column shows the value of the point. Binary points are shown as OFF or ON. Numeric
points show the numeric value of the point.