User manual

IEC61131 User and Reference Manual
April 22, 2008
512
The Secondary Phone Number is the dialing string that will be used for the secondary connection
to the station. The controller will make 1 or more attempts, as configured in the Application layer, to
connect using this number. This number is used after the primary connection fails on all attempts.
Valid values are any ASCII string. The maximum length is 32 characters. Leave this blank if you are
not using a dial-up connection. The default value is blank. The serial port type must be set to RS-232
Modem for dial-up operation.
The OK button checks the data for this table entry. If the data is valid the dialog is closed. If the
table data entered is invalid, an error message is displayed and the dialog remains open. The table
entry is invalid if any of the fields is out of range. The data is also invalid if it conflicts with another
entry in the table.
The Cancel button closes the dialog without saving changes.