User manual

IEC61131 User and Reference Manual
April 22, 2008
44
The Master Station parameter specifies the DNP station address of the RealFLO
application. When RealFLO sends out commands, responses from the target controller will
be directed to this address. The valid range is 0 to 65519, except that this value cannot be
the same as the target RTU Station number. The default value is 100.
The Maximum selection indicates that you want the host application to package messages
using the maximum size allowable by the protocol.
The Custom value selection specifies a custom value for message size. This value
indicates to the host application to package messages to be no larger than what is specified
if possible. The valid range for the Custom value field is from 2 to 231. Maximum is selected
by default.
 Click Restore Defaults to restore default values to all fields on this page