User manual

IEC61131 User and Reference Manual
April 22, 2008
510
The Timeout column displays the maximum time (in milliseconds) to wait for a Data Link response
before retrying or failing the message.
The IP Address column displays the IP address of the remote DNP station.
The OK button saves the table data. No error checking is done on the table data.
The Cancel button closes the dialog without saving changes.
Select the Add button to enter a new row in the DNP Routing table. Selecting the Add button opens
the Add/Edit DNP Route dialog.
Select the Edit button to modify the selected row in the DNP Routing table. Selecting the Edit button
opens the Add/Edit DNP Route dialog containing the data from the selected row. This button is
disabled if more than one row is selected. This button is disabled if there are no entries in the table.
The Delete button removes the selected rows from the table. This button is disabled if there are no
entries in the table.
The Allow Duplicate Modbus Addresses checkbox determines if the Modbus I/O database
addresses assigned to the DNP data points must be unique. Check this box if you want to allow more
than one point to use the same Modbus address.
Click on the column headings to sort the data. Clicking once sorts the data in ascending order.
Clicking again sorts the data in descending order.