User manual

IEC61131 User and Reference Manual
April 22, 2008
434
2. Right click your Direct Connection icon that was setup in the previous section and select
Connect from the list. A prompt for username and password is displayed.
3. Enter a valid PAP or CHAP username and password. Valid usernames and passwords
are configured on the PPP Login page of the Controller IP Configuration dialog and must
be downloaded to the SCADAPack 32. Then select the Connect button. If neither PAP
nor CHAP is being used, ignore the prompt and just select the Connect button.
4. A progress message is displayed. If the connection is successful the following message
is displayed.