User manual

IEC61131 User and Reference Manual
April 22, 2008
433
1. The SCADAPack 32 does not have a DHCP server to automatically provide an IP address.
Instead the PC‟s serial port must be given a fixed IP address to use for PPP connections.
Select the option Use the following IP address. Enter an IP address to assign to your PC‟s
serial port. Obtain this IP address from your Network Administrator. Then select OK to return
to the Properties dialog.
2. Select OK again to close the dialog.
Making a PPP Connection to the SCADAPack 32
A connection can only be made after successfully setting up a Direct Connection icon as
described in the section Connection Setup above. Also, a serial port on the SCADAPack 32
must already be configured for the PPP protocol using the Controller IP Configuration dialog
and must be downloaded to the SCADAPack 32.
1. From the Start menu, double click Network and Dial-up Connections from the
Settings group. The Network and Dial-up Connections dialog is displayed.