User manual

IEC61131 User and Reference Manual
April 22, 2008
25
5. Click on the Select button to select the target and then click the OK button to close the
dialog.
6. Select Make application from the Make menu in the Programs window.
7. The Code Generator window opens and a listing of the compiler output messages are
displayed as the application is made.
8. If there are any errors, shown in red text, the application is not made. The indicated
errors must be corrected before the application will be made.
Once all corrections have been completed and the application has been successfully made it
is ready for download to the target controller.
Download and Start the Application
Application downloading and execution control is accomplished using the ISaGRAF
debugger. Refer to section A.15 Using the graphic debugger of the ISaGRAF User‟s
Guide for complete information on the debugger.
To download an application to the target controller:
1. Select Debug from the Debug menu in the Programs window.
2. The debugger automatically connects to the target controller using the communication
link. The Debugger window is opened.
3. Select Download from the File menu in the Debugger window.
4. Select ISA86M: TIC code for Intel from the Download dialog.
5. A progress bar will display the progress of the download command.
6. Once the download is complete the application will start to run.
The application may now be viewed in real time. Select the Dictionary or one of the
programs in the Programs window to view real time data.