User manual

IEC61131 User and Reference Manual
April 22, 2008
293
getsfip2
Get Store and Forward Entry method 2
The getsfip2 function is used to obtain one translation from the Store and Forward Table.
This function block is used by the SCADAPack 350 and SCADAPack 32 controller series
only.
indexInTable
ifSlave
getsfip2
timeOut
stnSlave
ifFwd
stnFwd
ipFwd
Arguments
Inputs
Type
Description
indexInTable
Integer
Index of the entry in store and forward table.
Valid values are 0 to 127.
Outputs
Type
Description
ifSlave
Integer
Communication interface receiving slave command
message for selected table entry.
100 = LAN/PPP (any Modbus IP protocol)
1 = com1
2 = com2
3 = com3
4 = com4
stnSlave
Integer
Station address used in slave command message for
selected table entry.
0 to 255 in standard Modbus
0 to 65534 in extended Modbus