User manual

IEC61131 User and Reference Manual
April 22, 2008
281
getpmode
Get controller power mode
Description
The getpmode function block returns the current power mode settings for the controller.
Note: This function block is used by the SCADAPack 330 and SCADAPack 350 controllers
only.
getpmode
USBHo
power
LAN
Arguments
Inputs This function block has no inputs.
Outputs
Type
Description
LAN
Boolean
The LAN is enabled when TRUE.
The LAN is disabled when FALSE.
power
Integer
Controller Power State
0 = Reduced Power Mode
1 = Normal Power Mode
USBHo
Boolean
The USB host port is enabled when TRUE
The USB host port is disabled when FALSE
Notes
Refer to the SCADAPack 350 Hardware Manual or SCADAPack 330 Hardware Manual for
details on power consumption during various power modes.
See Also
setpmode, sleep