User manual

IEC61131 User and Reference Manual

April 22, 2008

Install Sentinel Driver and Key

Note: ISaGRAF 3.5 does not support hardware Keys used with ISaGRAF 3.32. A

replacement Hardware Key or Software License must be obtained.

If you are using a hardware key for your license you will need to connect the hardware key to

any parallel port on your PC, or a USB port if you have a USB key, and install the Sentinel

driver for the key. The following procedure describes the steps required to install the

hardware key and Sentinel driver.

Connect the hardware key to any parallel port, or USB port, on your PC.

 Insert the ISaGRAF CD in your CD-ROM drive.

 From the Windows start menu select Run.

 Enter d: \ISaGRAF Workbench\sentinel\SSD5411-32bit.EXE (where d is your CD-

ROM drive) and click OK.

 In the Sentinel Driver Setup Program window click on the Functions menu and select

Install Sentinel Driver.

For further information refer to the Readme.txt file in the d:\sentinel folder on the CD.