User manual

IEC61131 User and Reference Manual
April 22, 2008
212
sp5602
SCADAPack 5602 I/O module
Description
The sp5602 I/O module is comprised of three different types of I/O channels. The
SCADAPack sp5602 I/O hardware contains five analog inputs, five digital inputs and two
relay digital outputs. Each of these types of I/O is represented as a sub module in the
sp5602 I/O module. These sub modules are named AIN for analog input I/O channels, DIN
for digital input I/O channels and DOUT for digital output I/O channels.
The AIN s sub-module provides five I/O channels for the analog input data from the
SCADAPack sp5602 I/O hardware. Data for each of the five I/O channels may be connected
to user-defined variables with the I/O connection editor. Connected variables are updated
continuously with data from the SCADAPack sp5602 I/O hardware.
The DIN sub-module provides five I/O channels for the digital input data from the
SCADAPack sp5602 I/O hardware. Data for each of the five I/O channels may be connected
to user-defined variables with the I/O connection editor. Connected variables are updated
continuously with data from the SCADAPack sp5602 I/O hardware.
The DOUT sub-module module provides two I/O channels for the digital outputs of the
SCADAPack sp5602 I/O hardware. Data for each of the I/O channels may be connected to
user-defined variables with the I/O connection editor. The SCADAPack sp5602 I/O hardware
digital outputs are updated continuously with data read from the variables.
I/O Connection
Module address
No physical module address is required.
There is only one sp5602 module allowed per SCADAPack
controller.
Library type
IO complex equipment
AIN sub-module
Data type
Integer / real
Channel type
Input
Number of channels
5
DIN sub-module
Data type
Boolean
Channel type
Input
Number of channels
5
DOUT sub-module
Data type
Boolean
Channel type
Output
Number of channels
2
Notes
Refer to the SCADAPack System Manual for further information on the SCADAPack sp5602
I/O hardware.