User manual

IEC61131 User and Reference Manual
April 22, 2008
210
 Digital output channel 10 is used to control the Com3 (HMI) power.
0 = off
1 = on
Data for each of the I/O channels may be connected to user-defined variables with the I/O
connection editor. The SCADAPack 350 I/O hardware digital outputs are updated
continuously with data read from the variables.
I/O Connection
Module address
No physical module address is required.
There is only one sp350 module allowed per
SCADAPack 350 controller.
Library type
IO complex equipment
AIN sub-module
Data type
Integer / real
Channel type
Input
Number of channels
8
AOUT sub-module
Data type
Integer / real
Channel type
Output
Number of channels
2
DIN sub-module
Data type
Boolean
Channel type
Input
Number of channels
13
DOUT sub-module
Data type
Boolean
Channel type
Output
Number of channels
11
Notes
Refer to the SCADAPack 350 Hardware Manual for further information on the SCADAPack
350 I/O hardware.