User manual

IEC61131 User and Reference Manual
April 22, 2008
133
File Name specifies the C/C++ Program to write to controller. The file name may be selected
in a number of ways.
 Click on the Browse button to open a standard file open dialog.
 Use the drop-down menu to select the file from a list of previously written files.
 Type the path and file name directly into the edit box.
The Write button writes the selected file to the controller. The communication progress
dialog box displays information about the write in progress, and allows you to cancel the
write. If a C/C++ program is already loaded, it is stopped and erased before the selected file
is written to the controller.
The Cancel button exits the dialog without writing to the controller.
SCADAPack 330/334, SCADAPack 350 and SCADASense 4203
Controllers
If the controller type is a SCADAPack 330/334, SCADAPack 350 or a SCADASense 4203,
the C/C++ Program Loader dialog is given below. In contrast to all other SCADAPack
controllers, this dialog allows multiple C/C++ programs to be loaded, monitored and
controlled.
The dialog displays the C/C++ Programs that have been loaded in the controller. The status
of each program is indicated as Running or Stopped.
The Close button closes the dialog.
The Add button writes a new C/C++ program to the controller. Selecting the Add button
opens the Add C/C++ Program dialog. Refer to the Add C/C++ Program Dialog section
for a description of the Add C/C++ program dialog.