User manual

IEC61131 User and Reference Manual
April 22, 2008
5
 From the Windows start menu select Run.
 Enter d:\Firmware Loader\setup (where d is your CD-ROM drive) and click OK.
 Follow the on-screen instructions.
Demo Mode
When first installed ISaGRAF will run in the Demo Mode until a permanent license is
installed. The Demo version will run for a maximum of 30 days. The following message is
displayed when Projects is selected from the ISaGRAF 3.5 program group.
Note: When a hardware license is to be used you will see the above dialog if the hardware
key is not connected.
When running in the Demo Mode ISaGRAF does not support the following features:
 Archiving or Restoring projects.
 Exporting IEC 61131 programs to a library.
 Exporting variables.
 Embedding project source code in a target controller.
 Uploading source code from a target controller.
You will need to permanently license your copy of ISaGRAF version 3.5 in order to use the
above listed features.
Technician Tool License
The ISaGRAF Technician (Maintenance) Tool license provides the following limited
capabilities when working with applications:
 Perform many tasks: overwriting and backing up archives, updating, downloading,
starting, stopping, and debugging applications, setting communication parameters, cycle
timing, execution mode, and IL / SFC breakpoints, controlling SFC programs, timer
variables, and variable states, and locking/unlocking variables.
 Access in read-only mode: reading project descriptions and modification histories,
viewing the dictionary contents (local / global variables and defined words), I/O
connections, conversion tables, run-time parameters, compiler options, and resource
definitions, visualizing Spotlight debugging interfaces and spy lists
 Downloads are also possible from the Technician Tool.
Full License
A permanent license grants access to all the IDE functionality.