User manual

IEC61131 User and Reference Manual
April 22, 2008
116
LAN Port
The LAN Port property page is selected for editing by clicking LAN Port in the tree control
section of the Controller IP Configuration dialog. When selected the LAN Port property page
is active.
The IP Address is the address of the controller LAN port. The IP address is statically
assigned. Contact your network administrator to obtain an IP address for the controller. The
default value is 0.0.0.0.
The Subnet Mask is determines the subnet on which the controller LAN port is located. The
subnet mask is statically assigned. Contact your network administrator to obtain the subnet
mask for the controller. The default value is 255.255.255.0.
The Gateway determines how your controller communicates with devices outside its subnet.
The LAN radio button selects the gateway specified in the LAN edit box. Enter the IP
address of the gateway. The gateway is located on the LAN port subnet. The gateway is
statically assigned. Contact your network administrator to obtain the gateway IP address.
The default value is 0.0.0.0.
The PPP radio button selects the serial port where the gateway is located. The PPP drop
down menu displays only those serial ports currently configured for the PPP protocol. Select
a serial port from this menu to select its remote IP address as the gateway. The gateway is
automatically assigned to the remote IP address of the selected serial port.
com1 Port
The com1 Port property page is selected for editing by clicking com1 Port in the tree control
section of the Controller IP Configuration dialog. When selected the com1 Port property