Hardware manual

5901 High Speed Dialup Modem Hardware Manual
October 19, 2007
52
Response: +FCLASS: n
Example: +FCLASS: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +FCLASS=?
Response: +FCLASS: (n range)
Example: +FCLASS: (0,1,1.0,2,8,80)
10.4.13 +GCAP - Request Complete Capabilities List
This extended-format command causes the modem to transmit one or more lines of information text
listing additional capabilities command +<name>s , which is intended to permit the user to identify
the overall capabilities of the modem. In particular, if the modem implements a particular modem
control standard that uses Extended Syntax Commands, and if that modem control standard includes
command(s) that indicate general capabilities, the +<names>(s) of those commands will be reported
to the modem in response to a +GCAP command.
Command: +GCAP
Example Responses: +GCAP: +FCLASS, +MS, +ES, +DS, for a data modem that
supports all capabilities listed.
Where:
+FCLASS T.class1, +F (Class 1 Facsimile modem Control)
+MS +M commands (Modulation Control: +MS and +MR commands)
+ES +E commands (Error Control: +ES, +EB, +ER, +EFCS, +ETBM)
+DS +D commands (Data Compression: +DS and +DR)
10.4.14 +GCI=nn - Country of Installation
This extended syntax command selects and indicates the country of installation for the modem. This
parameter selects the settings for any operational parameters that need to be adjusted for national
regulations or telephone networks.
+GCI=nn
Where nn is the 8-bit country code from Annex A of T.35. The value is the hexadecimal equivalent
of the T.35 code, with bit 8 treated as the most significant bit and bit 1 treated as the least significant
bit.
The supported countries are:
Country Code
Australia: 09h
Austria: 0Ah
Belgium: 0Fh
Bulgaria: 1Bh