Hardware manual

5901 High Speed Dialup Modem Hardware Manual
October 19, 2007
41
COMPRESSION...............…….. V42Bis
Line QUALITY..............………… 038
Rx LEVEL..................………….. 015
Highest Rx State..........………… 67
Highest TX State..........………… 67
EQM Sum..................………….. 00B4
Min Distance..............………..… 0000
RBS Pattern...............………….. 00
Rate Drop.................…………… 00
Digital Loss..............……………. 2000
Local Rtrn Count..........………… 00
Remote Rtrn Count........………. 00
Flex 9481814347C4
RBS Pattern: Shows which bits are being robbed in the least significant 6 bytes, e.g., 03 indicates 2
robbed bits in bit positions 0 and 1.
Digital Loss: Shows if a pad was encountered and if so, what was the digital loss. 2000 means 0dB.
Flex: Shows V.8bis information as follows:
First byte: Octet 13 (second byte of manufacturer id, 94 = K56flex)
Second byte: Octet 14 (Licensee code: 81 = Rockwell)
Third byte: Octet 15 (manufacturer's product capabilities)
Fourth byte: Octet 16 (K56flex version number)
Fifth byte: Octet 17 (Rockwell pump code version number)
Sixth byte: Octet 18 (x-law and controller version number)
Bit 6 Forced/Not forced A-Law/m-Law
0 = Forced A-Law/m-Law
1 = Not forced A-Law/m-Law
Bit 5 Select A-Law or m-Law
0 = Select A-Law
1 = Select m-Law
Bit 4:0 Controller version
10.3.15 &Wn - Store Current Configuration
Saves the current (active) configuration (profile), including S-Registers, in one of the two user
profiles in NVRAM as denoted by the parameter value. This command will yield an ERROR
message if the NVRAM is not installed or is not operational as detected by the NVRAM test.