User Manual

TRAIN CHIEF® II LRCS W/ Lightweight OCU-BT – OPERATORS MANUAL
95-00-0-062, Rev 09 4-17 Control Chief Corporation
4.7 Transferring from Remote to Manual
¾ Turn off the OCU.
¾ Go to the locomotive and place the independent brake handle into the FULL APPLY
position and the automatic brake handle to the EMERGENCY position.
¾ Place the transfer switch on the receiver / controller unit in the MANUAL position.
¾ Place the air valve that feeds the receiver / controller unit in the OFF/MANUAL position.
¾ Recover from the locomotive PCS fault condition using the normal procedure.
¾ Secure the OCU to provide protection against unauthorized operation.
¾ Resume normal operations.