User's Manual

ADVANTAGE SERIES LJ45 TRANSMITTER OWNER’S MANUAL
ADVTG XMTR Rev 01 12 Control Chief Corporation
10 PRODUCT SUPPORT AND SPARE PARTS
Product Support
When contacting Control Chief Product Service please have the following information ready.
¾ Serial number: Located on the transmitter.
¾ Status of LED indicators on the crane mounted receiving unit.
¾ Description of the problem and its associated operational conditions/situation.
Returning Equipment to Control Chief for Repair
To return your transmitter to Control Chief for repair, please call Product Service to request a
Return Material Authorization (RMA) number. The RMA number must be included on the
shipping label and all correspondence related to the transmitter.
Contacting Control Chief
Control Chief
P.O. Box 141, 200 Williams Street
Bradford, PA 16701
PHONE: [phone]
FAX: [phone]
Toll Free: [phone]
Web Page:http://www.controlchief.com
E-mail: [e-mail]
Spare Parts and Accessories
If you require troubleshooting or help in part number identification, contact our Product Service
group for assistance (as noted above).
If you require additional battery packs, a replacement vest, or other components please contact
our Customer Service department.
Part Number Description
90-10-3-004 Battery, Li-Ion, Clip Style, 7.4VDC
90-10-2-011 Battery Charger, Li-Ion, Clip Style, 7.4VDC
0800-0290 Harness – Shoulder
0800-0650 Harness – Vest
10-15-0-005 Stepped Joystick Assembly
10-15-0-008 Stepless Joystick Assembly
91-04-0-xxx Case, Bottom Assembly
91-04-0-079 Case, Top & Middle Assy w/ Labels
10-05-3-003 Switch, Keylock, 2pos on/off
10-05-9-004 Switch, E-stop mini 2pole
0067-xxxx * Toggle switches, Auxiliary Functions
91-01-0-xxx * PWB Logic Assy, RF
* Contact Control Chief for correct item for your application.
ADVANTAGE SERIES LJ45 TRANSMITTER OWNER’S MANUAL
ADVTG XMTR Rev 01 1 Control Chief Corporation
1 Radio Warranty
Warranty
Control Chief Corporation guarantees that this equipment meets its published specifications at
the time of shipment from the factory. This equipment will perform as described if installed
properly. However, Control Chief cannot guarantee that operation of remote control system is
absolutely error-free, or without interruption.
Warranty Period
This equipment is warranted against defects in materials and workmanship for a period of two
(2) years from the date of shipment. Friction elements such as joysticks, buttons and
mechanical relays have a warranty period of 90 days. During the warranty period, Control Chief
is responsible for necessary repairs/replacement as long as the product can be proven
defective.
Warranty Service
For warranty service or repair, this equipment must be returned to Control Chief Corporation.
Customer is responsible for shipping charges to Control Chief. Control Chief’s warranty covers
only parts and factory labor. No on-site in and out charges are covered under this warranty.
Excluded Parts
This warranty does not include consumable parts such as batteries, fuses, and
slings/harnesses. Also, this warranty does not cover defects caused by improper installation,
improper/insufficient maintenance, unauthorized modification, improper operation, abuse,
ignorance of environmental specifications, and/or improper software/interfacing.
Remarks
No other warranty is expressed or implied, except for the above mentioned. The remedies
provided herein are the buyers’ sole and exclusive remedies. Control Chief shall not be liable
for any direct/indirect, special, incidental, or consequential damage. Consult Control Chief’s
general warranty for further information.
2 Safety
Safety Considerations
The safety guidelines in this manual are not intended to replace any rules or regulations or any
applicable local, state, or federal governing laws. The following information is intended to be
used in conjunction with other rules and regulations already in existence. It is important to read
all safety information before operating any wireless radio remote control system.
Only properly trained persons designated by management should be permitted to operate
wireless radio controlled equipment. Wireless radio controlled equipment should not be
operated by any person who cannot read or understand signs, notices and operating
instructions that pertain to the equipment.
Wireless radio controlled equipment should not be operated by any person with insufficient
eyesight or hearing nor by any person who may be suffering from a disorder or illness or is
taking any medication that may impair judgment or the ability to operate equipment.