Specifications

To have CPU wait for completion of conversion:
1) Set SW3-6 to ON
2) Set bit 7 of command register (write register 0 or 1)
3) Disable interrupts caused by DONE by not connecting the DONE
pin on the vectored interrupt header or cutting the trace
from IC4 pi n 3.
4) Set SW3-8 to ON only for fast CPU's (usually leave OFF)
Daughter Board
25
To set the maximum channel for auto incrementing:
switches to
ON that add up to the maximum channel
auto incrementing.
Set the
desired using
SW10-l
SW10-2
SW10-3
SW1D-4
SW10-5
SW10-6
SW10-7
SW10-8
Number of channels to add
1
2
4
8
16
32
64
128
For example. if channel 11 ;s the last channel to be converted
before returning to the initial channel, then SW1D-l, 2 and 4 should
be turned on.