User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 97 of 199
Prerequisites
Ensure that the Control4 Wireless Thermostat (model number: Control4-CCZ-T1-x for OS 2.0 and
later) is installed as directed in the Control4 Wireless Thermostat Installation Guide available on the
Control4 Dealer website.
To use the Thermostat Advanced Properties:
1. Start Composer and connect to a Director.
2. Click System Design.
3. Select the Control4 Wireless Thermostat in the project tree.
4. Click the Properties tab to view the list below.
Note: Different properties may appear, depending on the Thermostat model. The properties
below apply to the Control4 Wireless Thermostat for OS 2.1.
Modifiable Advanced Properties include:
Properties
Fahrenheit or Celsius—Sets the temperature display in Fahrenheit or Celsius.
View/Edit Schedule—Brings up the schedule page to set heat and cool set points for auto
mode (see below). In the mode (Awake, Leave, Return, etc.), set the day and temperature set
points. Click OK to close the window. Note: You can view the schedule by selecting the 12
Hour Display or the 24 Hour Display.