User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 90 of 199
Prerequisites
Ensure that the Wireless Fireplace Switch is installed as directed in the Control4 Wireless Fireplace
Switch Installation Guide available on the Control4 Dealer website. The Gas Fireplace Relay installs
with the Wireless Fireplace Switch.
To add and configure a Wireless Fireplace Switch:
1. Start Composer and connect to a Director.
2. Click System Design.
3. In the project tree, select the room where the gas fireplace resides. In the Items pane > My
Drivers tab > Motorization > double-click Fireplace Switch to add the relay object to the project
tree.
4. Click Connections.
5. In the Connections view, click the Control/AV tab to make the necessary connections to the
Output Device.
a. Select the Fireplace Switch object in the Fireplace Switch pane under Control & Audio Video
Connections.
b. Drag the desired Button Links to the device you choose in the bottom pane, for example,
Home Controller HC300.
6. (Optional) To configure the properties, click System Design.
7. In the project tree, select the Fireplace Switch object.
8. View and change the properties in the Properties pane.
Modifiable properties include:
Properties:
Invert Relay—If checked, the relay that appears as normally open becomes a closed circuit.
The default is open.