User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 89 of 199
5. In the Connections view, click the Control/AV tab to make the necessary connection to the Relay
Output Device.
a. Select the Gas Fireplace object in the Gas Fireplace pane under Control & Audio Video
Connections.
b. Drag the Relay to the device you choose in the Relay Output Devices pane, for example,
Home Controller HC300.
6. (Optional) To configure the properties, click System Design.
7. In the project tree, select the Gas Fireplace object.
8. View and change the properties in the Properties pane.
Modifiable properties include:
Invert Relay: Normally, the relay is open when the switch is off. If you check this option, the
switch's off position closes the relay.
Radio Buttons:
Toggle Type. Select if the fireplace needs two (2) wires always touching to stay on.
Pulse Type. Select if two (2) fireplace wires only need to touch momentarily to turn the
fireplace on or off.
Pulse length is x milliseconds. Add the desired value here.
2.5.9.2 Configure a Wireless Fireplace Switch
Use the Control4® Composer Pro System Design and Connections views to configure a Wireless
Fireplace Switch.