User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 83 of 199
2.5.8.2.2 Program the SR-250 Paging Feature
Configure the Beep paging feature for this System Remote Control version through programming. Use
this feature to page a lost System Remote Control. You can program a Keypad or a custom button to
cause the System Remote Control to beep when pressed.
To program the paging feature for this System Remote Control:
1. Start Composer and connect to a Director.
2. Click Programming.
3. Select the Event that you want to use to start the page. Example: To select a Keypad button
press, first select the Keypad in the Device Event pane, and then select the button in Events.
4. In the Actions list, select System Remote Control SR-250.
5. In the Commands list, choose an action below for the System Remote Control, and then drag the
green arrow to the Script pane.
• Beep until button press—The System Remote Control beeps until you press one of its
buttons.
• Beep for X seconds (<254)—The System Remote Control beeps until X seconds have
elapsed or you press one of its buttons.
• Stop Beep—The System Remote Control stops beeping.
6. Click Execute.
2.5.8.2.3 Change the Order of Watch/Listen Sources
To change the order of your customer's sources when they press Watch/Listen:
1. In Composer Pro, click System Design.
2. In the project tree, click the room to control.
3. Click the Navigator tab.
4. From the Menu (left side), select the function to change; for example, Watch or Listen.
5. Select the item in 'Device Visibility and Display Order,' and then click Modify.
6. Change to the desired order, and then click OK.