User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 76 of 199
“Configure Mobile Devices or PCs/Tablets as Navigators”
2.5.8.1 Configure System Remote Control SR-150B
Use the Control4
®
Composer Pro System Design and Connections views to add and identify this
device.
Prerequisites
Ensure that the SR-150B is installed as directed in the Control4 System Remote Control System
Remote Control SR-150B Setup Guide.
To add and configure an SR-150B:
1. Start Composer and connect to a Director.
2. Click System Design.
3. In the project tree, select the room where the System Remote Control resides. In the Items pane
> My Drivers tab > User Interface > double-click System Remote Control SR-150 to add the
object to the project tree.
4. Click Connections.
5. In the Connections view, click the Network tab to make the necessary network connection.
6. Select the System Remote Control SR-150 object, and click the Identify button.
7. In Identify mode, go to the physical System Remote Control, and press the Red 4 button to
identify the System Remote Control to the Control4 system.