User guide

Composer Pro User Guide

Saved: 1/20/2012 1:31:00 PM

200-00005 Composer Pro

User Guide Part 1

Page 63 of 199

3. Ensure that the AV device, such as the Samsung Television object, is added and configured for

the device.

To configure a Wireless Outlet Switch to use an AV device, do the following:

Select the Power Codes

1. Start Composer and connect to a Director.

2. Click System Design.

3. In the project tree, right-click the Samsung Television and select Edit Driver. The Driver Wizard

opens.

4. In the Driver Wizard, check Has power feedback.

5. Change the Power Management option to Contact sensor; ensure that the Send toggle code is

selected.

6. Click Codes.

a. In Codes under Default Commands, make sure Power On and Power Off, or Power Toggle

items are not checked. If they are, any programming you do in conjunction with power using

the Wireless Outlet Switch and the television is invalid.

b. Click Finish.

c. Click next to close the window.

IMPORTANT: Don’t click back to check if the selection was saved because it refreshes the screen; in

that case, you will need to redefine what you just defined.

Define the Connection

7. Define the connection between the Wireless Outlet Switch and the plugged-in device (Samsung

Television).