User guide

Composer Pro User Guide

Saved: 1/20/2012 1:31:00 PM

200-00005 Composer Pro

User Guide Part 1

Page 48 of 199

Example:

• Network Name (SSID): <name of wireless access point>

• Data encryption: wep64

• Key Type: hex

• Network Key (in hex): ABCDE12345.

Note: If the hex Network Key you insert is not valid, a screen with a red exclamation point comes

up. In this case, enter your key again.

14. Click Test to test your network connection. If it fails, follow the on-screen instructions.

15. Click Finish when you come to the “Congratulations! You have successfully changed your

network configuration” screen.

16. At this time, the system reboots. Do not disconnect any temporary Ethernet cables until the

device has successfully rebooted and is powered on.

17. If you are using the WiFi to communicate to your Control4 Controller, disconnect the Ethernet

CAT5 cable.

2.5.6.8 Configure a Media Player

Use the Control4

Composer Pro System Design and Connections views to add and configure a

Media Player. This device auto-scans videos. A Media Player (such as Netgear EVA8000) lets you

play media that is stored on a network drive or available through the Internet to a TV.

The Media Player driver lets the Control4 system interact with the Media Player hardware through one

of the Control4 System Remote Controls. The driver also supports the video playback functionality of

the hardware, allowing the Control4 Navigators to be used to select a video title.

Note: In Release 1.8, the Media Player (V1) does not work with ZigBee Pro. Use Media Player V2.

The Media Player V2 driver is C4-MP2-E, located in the driver database.