User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 45 of 199
9. (Optional) Configure the Speaker Point properties.
Modifiable properties include:
• Local Amp Mode not checked (default). When the box is not checked, the Speaker Point
streams the analog input through the Control4 audio distribution system, making the source
digitized and available to other audio zones throughout the house.
• Local Amp Mode checked. When the box is checked, it sets the Speaker Point in Local Amp
Mode, enabling a local input source outputs directly, is not digitized and provides audio and
video in one room. This enables devices that provide audio and video, such as a DVD, VCR,
or Satellite Receiver to send output to the amplified audio outputs: the Right and Left
Speakers in the room. If Local Amp Mode is not checked and you try to watch video in the
room, the video or audio sound will be out of sync with the video.
10. Now configure the system for WiFi. By default, the Speaker Point is configured for Ethernet use. If
you are using WiFi, follow the instructions next.
2.5.6.7.1.2 Configure Speaker Point for WiFi Use
To configure Speaker Point for WiFi use:
1. Start Composer and connect to Director on Local Network.
2. In the Tools menu, select System Manager.
3. In the Devices pane, select the network address of the device you want to configure, and click
Connect.