User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 34 of 199
8. (Optional) Configure additional 4-Zone Amplifier properties.
a. In the System Design view on the project tree, select the Amplifier object.
b. Modify the properties in the Properties pane:
Modifiable properties include:
• Inputs Locked—This locks Audio Inputs to set Audio Outputs. You can have one (1) Audio
Input with several Audio Outputs, but an Audio Output may only have one Audio Input.
• Power Save Enabled—Check to save power.
• Device Firmware—This displays the firmware version.
• Power Save Status—This displays that power save is enabled.
• Volume Curve—
• Output Settings: