User guide

Composer Pro User Guide

Saved: 1/20/2012 1:31:00 PM

200-00005 Composer Pro

User Guide Part 1

Page 18 of 199

• List View—Select a room, and then select the List View tab. This option lets you view and

maybe modify the devices in the room. For more information, see “Device Properties” in the

Composer Pro Getting Started.

• Device—Select the device to modify the available user options. For more information, see

“Device Properties” in Composer Pro Getting Started.

2.4.2 Example of Device Properties Configurations

Use the Control4

Composer Pro System Design view to check the properties of devices, rooms and

projects. The properties in these examples, of course, will vary from product to product.

2.4.2.1 Wireless Dimmer or Wireless Switch Properties

When selecting a lighting product, for example, Wireless Dimmer or a Wireless Switch in System

Design, the Properties and Advanced Properties are displayed. These properties let you customize

the configuration of the Dimmer or Switch.

Example Properties pane:

2.4.2.1.1 Properties

These properties are available only on the Wireless Dimmer.

• Click Ramp Rate Up—The rate in seconds at which the light ramps from Off to On.

• Click Ramp Rate Down—The rate in seconds at which the light ramps from On to Off.

• Preset Level—The percentage of the load to which the Dimmer ramps when turned On.

2.4.2.1.2 Advanced Properties

• LED

• Top Color On—The LED color for the top LED when the LED state is On.

• Top Color Off—The LED color for the top LED when the LED state is Off.

• Bottom Color On—The LED color for the bottom LED when the LED state is On.

• Bottom Color Off—The LED color for the bottom LED when the LED state is Off.

• Options