User guide

Composer Pro User Guide

Saved: 1/20/2012 1:31:00 PM

200-00005 Composer Pro

User Guide Part 1

Page 178 of 199

5. (Optional) To save the log, but continue logging the results, click Clear Output. The logging

feature remains enabled, but a Save As dialog box lets you specify the location and name of the

text version of the log.

6. (Optional) To save the log and disable the logging process, click Stop Logging. The logging

feature is disabled, but a Save As dialog box lets you specify the location and name of the text

version of the log.

7. To view the Controller Log, click Open Controller Log.

2.11 Information about Older Releases

Some Composer Pro tasks may refer to older software releases (prior to OS 2.0) for the Control4

system. See the sections below (Release 1.3 and earlier and Release 1.8 and earlier) or refer to the

Release Notes for a particular release.

2.11.1 Release 1.8.x and 1.7.x

2.11.1.1 Release 1.8.2

• Navigators. Resolved focus issues which were fixed in Release 1.7.4 but not included in

Release 1.8.2.56194 due to release timing.

• Dock for iPod. Resolved a problem where the Control4 Dock for iPod would prematurely

stop playing music when it was being used in a multiple room session and rooms left the

session.

• Rhapsody. Resolved the problem with the Rhapsody agent always being re-enabled (if it had

been disabled) when Director loads the project.

• Composer. Fixed the issue with the ‘Project is Locked’ message which would occasionally

occur even if the Controller was not being updated.

• ZigBee Server. Fixed a problem where the ZigBee Server would not talk to the ZAP if its IP

address changed. Other minor fixes to improve ZigBee Server are also included.

• Thermostat Firmware/Driver.