User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 162 of 199
Guideline Where To Go
“Cannot Identify the Device to the Network”
“Verifying the Network Connections”
Ensure Navigators are
connected to Director
From any of the Navigators, press Info > Director (for releases prior to 2.0) or
More > Settings > Network (OS 2.0 and later) to ensure that you are
connected to the Control4 Controller’s network address. You can find out the
Control4 Controller’s network address from the Connections view > Network
tab.
For more information, see ”Customizing Navigators.”
Ensure music is added and
scanned
In Composer Pro, ensure that your music is available (added to the Controller)
and is scanned into the system.
1. Make sure the stored or broadcast media is added or scanned.
2. Check the Room Properties page to see if the media was added.
3. Ensure that Navigators were refreshed after scanning media.
4. If the Controller reboots, re-scan the media.
For more information, see:
“Items Pane” (see Composer Pro Getting Started)
“Setting Up Media Stored on a Controller”
“Setting Up Media Stored in a Disc Changer”
“Setting Up Media for Television Channels”
“Setting Up Media for Radio Stations”
“Using External Storage Devices”
“Adding an Audio Switch or Audio/Video Switch”
“Creating a Playlist”
“Editing Media Information”
“Testing Media Control”
Refresh Navigators
Whenever you update or scan music, or update devices or device information,
from the File menu, select Refresh Navigators.