User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 160 of 199
2.9.2.4.2 Disconnect/Remove Control/AV Connections
To disconnect or remove a control/A/V connection:
1. Click the Connections view.
2. Select the Control/AV tab.
3. In the Control/AV project tree, select a device for the device’s control and AV connections to
appear.
4. In the Control and AV Connections pane, right-click an input (or output) connection and choose
Disconnect.
2.9.2.4.3 Re-assign Control/AV Connections
To reassign Control/AV connections:
1. Click the Connections view > Control/AV tab.
2. In the project tree, select a device for the device’s control and AV connections to appear.
3. In the Control and AV Connections pane, drag an input from the top pane to a different output on
the bottom pane. The connection is moved to the specified output.
2.9.2.4.4 Update Connections in the Project if You Change Locations
If you use the same project but you change locations, you have to update all of the connection
information.
To update the connection information in an existing project:
1. Click the Connections view.
2. Click the Control/AV tab, and review your connections to ensure that they are updated in the
current control and AV topology.
3. Click the Network tab and disconnect all connections by right-clicking and selecting
Disconnect.
2.10 Troubleshooting the System
These sections provide some information about troubleshooting a Control4
®
system.
“Guidelines for Troubleshooting”
“Troubleshooting a Director Connection”
“Troubleshooting Controllers”
“Troubleshooting Device Control”
“Troubleshooting Dimmers, Switches and Keypads”
“Troubleshooting Driver Creation”
“Troubleshooting Media”
“Troubleshooting Navigators”
“Troubleshooting the System”
“Cannot Identify the Device to the Network”
“Troubleshooting the Upgrade Process”