User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 151 of 199
k. When the Touch Screen identify screen appears, press the indicated button as shown. When
the address appears, click Next.
l. When the 3 Button Keypad identification screen appears, press the top button four (4) times.
When the address appears in the box, click Next.
m. When the Control4 Wireless Thermostat identification screen appears, press the middle
button four (4) times. When the address appears in the box, click Close to exit Identify mode.
n. When you finish identifying the devices, notice that the Address column now has an address
for every network device.
3. Define the AV and Control connections.
Control and AV connections for a device are visible when you click the Connections view >
Control/AV tab, and then select the device. To make a connection between inputs and outputs,
from the top pane drag a device’s input (or output) to the output (or input) in the bottom pane.
For each device, define the following when applicable:
• Video connections (path of video signals)
• Audio connections (path of audio signals)
• Control connections (how the Controller communicates with the device)