User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 150 of 199
b. Select the Controller, and then click Identify. The screen to identify the Controller appears
(in this example, the HC1000).
c. At the physical Controller, press the Identification button. This identifies the Controller with a
unique address in the system. When the address appears on the screen, click Next.
d. Select Dimmer, and then click Identify. The screen to identify the Dimmer appears. Press the
top Dimmer button four (4) times. This identifies this specific Dimmer with a distinctive
address to the system. When the address appears, click Next.
e. When the Light Switch identification screen appears, press the top button four (4) times.
When the address appears, click Next.
f. When the System Remote Control identification screen appears, holding the physical System
Remote Control press the red 4 button once. When the address appears in the box, click
Next to continue.
g. If you have a Touch Screen in your project, press the Enter button on the front of the Touch
Screen. When the address appears in the box, click Next to continue.
h. When the Outlet Switch identification screen appears, press the button on the module four
(4) times.
i. When the 6 Button Keypad identification screen appears, press the top left button four (4)
times. When the address appears, click Next.
j. When the Dimmer identification screen appears, press the top button four (4) times. When
the address appears, click Next.