User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 139 of 199
7. Choose the device to which the Theater Receiver sends audio and/or video.
Example: Double-click Theater > Television to add it to the 'Connected Devices' list.
a. Click next.
b. Choose how the Theater Receiver Output connects to the Television, and then click next.
Example: In Audio Connections, check INPUT AV1, and then check STEREO. In Video
Connections, check INPUT AV1, and then check COMPOSITE.
c. Click next.
d. If applicable, choose the device(s) to which the Theater Tuner sends audio and/or video
signals. Make connections only to stand-alone tuners. A tuner that is a built-in component to
another AV device, such as Receiver, uses the host’s connections.
Example: The Tuner in this project is a built-in tuner to the Receiver, and therefore, uses the
same AV Connections set up previously for the Receiver.
e. Click next.
8. Choose how the Bedroom Touch Screen sends audio and/or video signals.
Example: The Touch Screen does not send audio to any of these devices. It only sends audio to
the powered speakers, which are not shown in Composer Pro projects. Ensure that nothing is
selected.