User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 132 of 199
b. Add the Receiver to the Devices in Room list using the Online Database.
Example: Add the Receiver, select the Online Database, choose the manufacturer Harmon
Kardon, and then double-click the model AVR 230[IR] from the list.
c. Add the Television to the 'Devices in Room' list using the Online Database.
Example: Double-click Television, select Online Database, choose the manufacturer
Samsung, and then double-click the model TX-P1430. This adds the device driver for cable TV
and UHF/VHF.
d. Click next.
8. Add the Dimmers, Switches, and Outlet Switches to the Devices in Room list, and give each a
descriptive name (edit immediately after adding while still in edit mode, or right-click later).
Example: Use the previous examples to
Add a Wireless Dimmer, and rename it Dimmer.
Add a Wireless Switch, and rename it Light Switch.
Add a Wireless Outlet Switch, and rename it Television Outlet Switch.
9. Click next.
10. Add the Sensors and Contacts to the Devices in Room list, and give each a descriptive name.
Example: Add a Door Contact Sensor for the door to the Theater.
11. Click next.
12. Add the Motorized Devices to the Devices in Room list.
Example: Add a Motorized Screen to the Theater.