User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 108 of 199
To delete a device:
Remove a device from the managed list in the Properties pane.
1. In the Managed SNMP Devices pane, click Delete or right click and select Delete Device.
2. In Target Device, select the device to delete. To delete several devices use CTRL or SHIFT and
select the devices.
3. Click OK. The device(s) disappear from the Managed SNMP Devices pane.
Notes: (1) Deleting a device removes it from the list, but the properties are saved.
(2) You can add the device back into the project with the last saved SNMP settings.
To add trap targets:
Add the IP address or host name of the NMS console to send trap targets to in the Properties pane.
1. In the Managed SNMP Devices pane, select the device to manage.
2. In the Trap Targets pane, click Add.
3. In Add Trap Target, type the following:
• Target. IP address of the console that will receive the traps.
• Community. (Optional) Information will be taken from the Community Strings boxes.
• Port. (Optional) The default is 162.
4. Click OK. The information will be added to the Trap Targets pane.
Tip: If you click the System Variables tab, and check SNMP Trap Enabled, the traps will be
enabled for the selected variable.
Note: You may have conflicts if the Trap Enabled values in System Variables are different (some
True, some False).