Manualshelf

User guide

ManualsBrandsControl 4 ManualsAmplifierMulti Channel Amplifier16
101102103104105106107108109110
Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
200-00005 Composer Pro
User Guide Part 1
Page 103 of 199
Prerequisites
Ensure that the Black & Decker locks are installed as directed in the Black & Decker Installation
instructions shipped with the product.
To add and configure Black & Decker locks:
1. Start Composer and connect to a Director.
2. Click System Design.
3. In the System Design view on the project tree, select the rooms where the Black & Decker locks
are installed. In the Items pane, click the Search tab and search for Black and Decker in the
Manufacturer box.
4. Double-click Black and Decker SmartLock RF ZigBee to add the object to the project tree.
Tip: If you are adding several locks in a home, it might be useful to give each lock a unique name.
5. For each lock you add to the project, add a Relay to the project tree also. See “Configuring
Contacts and Relays.”
6. To identify the device, click the Connections view and Network tab. Select the Black and
Decker ZigBee Lock object, and click the Identify button. When prompted, press the Join
Network button four (4) times. For more information, see the table in “Example: Verify the
Network Connections.”
7. Click the Connections view.
8. In the Connections view, use the Control & Audio Video Connections tab to make the
necessary control connection.
9. Under Control Outputs, select the Lock State and drag it down to the Relay in the RELAY Input
Devices pane.
10. (Optional) For additional Black and Decker ZigBee Lock setup, configure the Properties.
a. In the System Design view project tree, select the Black and Decker ZigBee Lock object.
b. Modify the properties in the Properties pane, and then click Set (if applicable).
Debug Mode: Use the drop-down menu to select logging and printing.
Lock Sleep Timer: Use the drop-down menu to select how long the lock is in sleep mode
(in seconds).
Last Status. Last change made in Debug Mode.
Instructions. See the Documentation tab.
Name, Code x: Enter the lock name and code here. You can enter up to 32 code entries.