Instruction manual

ON OFF AV OUT COAXIAL USB DC OUT DC IN 9-12V

Stereo Receiver /

Amplier

Listening on an External Audio Device

1. Connect the DVD player to the left/right Audio In sockets on the audio device using the

included 3.5mm to RCA AV Cable (included).

2. Turn on your audio device and follow the instructions provided with it to select the AUDIO

IN function.

• Make sure the correct Audio cable is used. Connecting the plugs incorrectly may cause a weak signal.

• If you have a stereo VCR, make sure you set it to stereo mode.

• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a

videotape, the resulting copy will be unclear, with poor sound quality. This is NOT caused by a

defective DVD system.

Connecting to a Multi-channel Audio Receiver

For better sound quality, you may want to play the DVD audio through your multi-channel audio

receiver. (DVD mode)

DVD player

left side

To Coaxial

socket

3.5mm to RCA Audio Cable

(Not included)

Long-term exposure to loud music

may cause hearing damage. It is

best to avoid extreme volume when

using earphones, especially for

extended periods of time.

Using Earphones

Turn down the volume before connecting the headphones/earphones. Slowly raise the volume

with the headphones/earphones on until you reach your desired volume. When headphones/

earphones are connected, the speaker is automatically disabled.

DVD player

left side

Headphones / Earphones

[1/8” (3.5mm) diameter plug]

(included)

L9DUALM12_IB_121109_Michelle.indd 17 09/11/2012 11:05 AM