Instruction manual
16
ON OFF AV OUT COAXIAL USB DC OUT DC IN 9-12V
ON OFF AV OUT COAXIAL USB DC OUT DC IN 9-12V
Connecting a Stereo Receiver or Amplier
The DVD player can play two channels Dolby Digital.
DVD player
left side
3.5mm to RCA
AV Cable
(included)
To AV OUT
socket
• Make sure the correct Audio/Video cable is used. Connecting the plugs incorrectly may cause
a weak signal.
• If your TV does not have Audio/Video inputs, you will need to purchase an RF modulator (sold
separately) and follow the instructions included with it to connect the unit to your TV.
Connections
Connecting a TV (for the DVD Player Only)
If your TV has Audio/Video inputs, you can connect the DVD player to your TV using a standard
AV cable (included).
Watching a DVD on your TV
1. Connect your TV to the DVD player using the included 3.5mm to RCA AV Cable (included).
2. Turn on the DVD player.
3. Turn on the TV and follow the instructions included with it to play the DVD.
DVD player
left side
3.5mm to RCA
AV Cable
(included)
To AV OUT
socket
TV
Yellow Red White
Stereo Receiver /
Amplier
YellowRedWhite
DO NOT CONNECT
L9DUALM12_IB_121109_Michelle.indd 16 09/11/2012 11:05 AM